P-Tec Optoelectronics Details from Competitive Components

P-tec Corporation has been offering quality LEDs and LCDs for more than 20 years.  P-tec specializes in discrete (SMD & Thru-Hole) LED packages and components plus character and graphic LCD displays.   Please read further about products offered from P-tec.  

TFT LCD (Thin Film Transistor)


TFT products are considered one of the fastest growing innovations in the market. P-tec focuses on providing small to medium sized TFT products ranging from 1.44” to 7” sizes. These displays can be used for applications like MP3 players, mobile devices,digital frames, toys, and GPS devices, ATM machines, self-service kiosks, digital signage, gaming, POS, medical treatment devices, media players, and other industrial control systems.  Depending on custom   Depending   on customer requirement, resistive and capacitive touch panels are optional for most of these products. Custom-made and sunlight readable TFTs are also available for some of these products.




LCD Glass

P-tec provides an extensive line of standard LCD glass products from 1 to 24 digits (although most of our LCD glass panels are customized to fully meet our customers’ requirements). P-tec's products can be made with pin, zebra, heat seal, of FPC connections; multi-color inside or outside screen printing; positive or negative; sunlight readable; high reliability of over 100,000hours; extreme temperature range from -40° to +90°C; wide viewing angle, fast response time (<1ms); customized shapes, and more.




Character LCM

P-tec’s wide select on of character LCD products range from 1x8 to 4x40 characters. Each display can be equipped with various color backlight options, display mode options (TN, STN, FSTN; positive, negative; yellow-green, blue, gray; special), different data interfaces (4-bit, 8-bit, SPI, I²C, RS232). Customization is available upon request with a selection of different connectors and cables.




Graphic LCM

P-tec offers a broad range of standard graphic LCD modules including package from COB, COG to TAB; size from 1.0” to 5.7”; resolution from 100x32 to 320x240 dots; and built-in negative voltage.


Backlights


P-tec provides total backlight solutions for LCDs. Our backlights can be designed with various colors, i.e. RED, Green, Blue, Amber, White, Yellow-green, and RGB. The designs can be customized with super low power, long life-time, high reliability, high brightness, super-thin (0.5 to 1.0mm), or with other featured structures such as snap-in tabs, alignment posts, housing, mounting holes, etc.

FS-LCD (FIELD SEQUENTIAL LCD)

P-tec provides sectioned colors that are changeable by using FS-LCD.  RGB LED used for backlight, and 8 vivid colors are available to be chosen from (Blue, Red, Green, Purple, Cyan, Yellow, White, and Black). FS-LCD products are typically used in appliances.

AUTOMOTIVE LCDS


P-tec can offer various technological innovations to meet the display quality demands of automotive applications. Technical capabilities include VTN (Vertical TN), FFSTN (Double Film STN), ASTN (Advanced STN), and ESTN (Enhanced STN)


TOUCH PANELS: M3 TFT (INTELLIGENT TFT)


P-tec can supply regular TFT products with a control board known as M3 TFT. It has the following advantages:
1) Never obsolete to accommodate projects with long-term availability requirement.
2) Simple interface - 8080/6800 - the same as monochrome LCD interface. If a monochrome LCD is used previously, no major changes for hardware would be required. The driving of Intelligent LCDs is similar to SED1335 or S1D13700.
3) Microcontroller is used to drive M3 TFT, where low cost and short product on time can be achieved.
4) Easy to mount, with mounting holes.
5) Optional Blue Mode, White/Black Mode, and Color Mode


Contact your Competitive Components account representative today for all your P-Tec needs.  Competitive Components is an authorized P-tec Optoelectronics distributor.